UL1007 Tin-Plated Jumper Wire - 26AWG to 20AWG

1007 wire is a type of electronic wire model certified by UL in the United States, which is mainly used in weak current engineering, such as internal wiring of electronic and electrical equipment. The following is a detailed introduction about 1007 wire:

Basic parameters:

Rated temperature: 80°C, which means it can work stably and safely at or below this temperature. Exceeding this temperature may affect its performance and safety.

Rated voltage: 300V, suitable for the internal circuit connection of general low-voltage electronic equipment, which can ensure the normal transmission of current within this voltage range and will not cause insulation breakdown and other problems.

Conductor material: The internal conductor is divided into bare copper and tinned copper according to normal standards. Bare copper has good conductivity, but it is prone to oxidation; tinned copper has a layer of tin on the surface of the copper conductor, which can improve the oxidation resistance and welding performance.

Wire diameter specifications: Its general nominal is in AWG (American Wire Gauge) units, and different wire gauges correspond to different numbers and diameters of wires. Some common specifications are as follows:

30AWG: 7/0.1, outer diameter 0.3mm, insulation thickness 0.41mm, outer diameter of the wire 1.12mm;

28AWG: 7/0.127, outer diameter 0.38mm, insulation thickness 0.41mm, outer diameter of the wire 1.20mm;

26AWG: 7/0.16, outer diameter 0.48mm, insulation thickness 0.41mm, outer diameter of the wire 1.30mm;

24AWG: 11/0.16, outer diameter 0.61mm, insulation thickness 0.41mm, outer diameter of the wire 1.43mm, etc.

The 1007 wire mainly has the following application scenarios:

Internal wiring of electronic devices: such as the circuit connections inside various electronic products such as computers, mobile phones, and tablets.

Instruments and meters: used for the internal lines of various measuring instruments and meters.

Small household appliances: such as electric fans, juicers, and coffee makers in the circuit connections of small household appliances.

Industrial control equipment: it is also often used in the internal wiring of some industrial control equipment.

Lighting systems: the internal wiring of some lighting fixtures will choose 1007 wire.